Product specifications cold drawn alloy wire diameter φ1.0-φ10.0mm alloy hot-rolled plate element diameter φ8.0-φ12.0mm cold rolled strip thickness 0.5-3.5mm cold rolled alloy alloy alloy hot rolled strip width 5.0-45.0mm alloy hot rolled strip thickness 3.0-6.0mm strip width 12.0-45.0mm bright filaments around the axis around the shaft diameter φ0.1-φ1.0mm Biansi bright light around the axis thickness 0.08-1.50mm width 0.5-5.0mm Biansi Delivery Status 1, delivery status wire and plate element with white or light-colored soft oxidation state supplies. In addition to the special requirements of the strip, in general, after annealing oxide color supply. Filaments and flat wire through the protective gas annealing to supply light soft state. 2, product packaging wire and strip to pack cloth bandage rolls supply. Filaments and flat, around the axis plastic supply. 3, export products and customers have special requirements, negotiated settlement. Notes 1, electric wire should be designed according to the power wiring methods, reasonable surface load, the correct selection of wire diameter; 2, electric wires before installing the furnace respond comprehensive inspection, remove the ferrite junction carbon, and the electric contacts risks, avoid short circuits, causing the furnace to prevent wire breakdown; 3, wiring method when installing electric wire should be designed properly connected; sensitivity 4, before using electric wire temperature control systems should be checked to prevent temperature failure, resulting in electric wire burned.